Fsk-718b Sell Foil Scrim Kraft Facing

• Type: Roll
• Temper: Soft
• Treatment: Coated
• Thickness: Thick Foil
• Surface State: Single Light Aluminum Foil
• Rolling Characteristics: Finish Rolling
• Model NO.: FSK-718B
• Material: Aluminum
• Width: 1.0m, 1.2m, 1.25m, 1.30m, 1.35m
• Length: 1000-3900m
• Transport Package: Standard Export Package
• Specification: ISO9001, BSCI, ASTM, UL, SGS
• Trademark: Bondtape
• Origin: Jiangyin, China
• HS Code: 76072000
• Production Capacity: 500 Millions Quare Meters

Product Description

Product Application
High quality Foil-Scrim-Kraft Facing with 2-way scrim and 80gsm Kraft, mainly used as a facing & vapor barrier of glasswool / rockwool / mineral wool / foam duct wrap insulation, also suitable for other insulation applications where a general use vapor retarder is needed. It is also a good choice for radiant barrier applications because of its low emissivity.
Facing Composition

Facing Composition	Description	Value (English)	Value (Metric)
Foil	Aluminum	0.28 mil	7 micron
Reinforcing - MD	Fiberglass	1/2 inch spacing	12.5mm spacing
Reinforcing - XD	Fiberglass	1/2 inch spacing	12.5mm spacing
Adhesive	Polyethylene	------	------
Kraft	Natural	49 lbs / 3000 ft2	80gsm

Typical Physical Properties

Physical Properties	Test Method	Value (English)	Value (Metric)
Basis Weight	Scale	23.5 lbs / 1000 ft2	115 gsm
Permeance (WVTR)	ASTM E96, Procedure A	0.1 perm	5.75 ng/N.s
Tensile Strength - MD	ASTM D828	34 lbs/In	150 N/25mm
Tensile Strength - XD	ASTM D828	18.2 lbs/In	80 N/25mm
Burst Strength	ASTM D774	58 psi	40 N/cm2
Low Temperature Resistance	ASTM D1790 4 hrs @-40 °F (- 40 °C)	Remains Flexible No Delamination	Remains Flexible No Delamination
High Temperature Resistance	ASTM D1790 4 hrs @ +240 °F (+116 °C)	Remains Flexible No Delamination	Remains Flexible No Delamination
Dimensional Stability	ASTM D1204 @ 150F (65C)	Less than 0.5%	Less than 0.5%
Emissivity	ASTM E408	0.03	0.03

Available Roll Width: 1.0m, 1.2m, 1.25m, 1.30m, 1.35m
 
Remarks
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Log Roll: ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature, kept away from wet and heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.