AF2205
PRODUCT DESCRIPTION
A nominal 22 micron (0.88 mil) high tensile strength aluminum foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper.
FEATURES
• Aluminum backing provides excellent reflection of both heat and light.
• High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application.
• Low moisture vapor transmission rate makes BondTape AF2205 an excellent vapor barrier.
• Service Temperature range from -20° to +80°C (-4° to +176°F).
TYPICAL PHYSICAL PROPERTIES
| PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
| Backing Thickness |
22 Micron |
0.88 Mil |
PSTC-133 / ASTM D 3652 |
| Total Thickness |
55 Micron |
2.20 Mil |
PSTC-133 / ASTM D 3652 |
| Adhesion to Steel |
18 N/25mm |
65 Oz./In. |
PSTC-101 / ASTM D 3330 |
| Tensile Strength |
40 N/25mm |
9.1 Lb/In |
PSTC-131 / ASTM D 3759 |
| Elongation |
3.0 % |
3.0 % |
PSTC-131 / ASTM D 3759 |
| Service Temperature |
-20 ~ +80 °C |
-4 ~ +176 °F |
------------ |
| Applying Temperature |
+10 ~ 40 °C |
+50 ~ +105 °F |
------------ |
TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 1200m / 1350m
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user's method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).
AF2505
PRODUCT DESCRIPTION
A nominal 25 micron (1.0 mil) high tensile strength aluminum foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper.
FEATURES
• Aluminum backing provides excellent reflection of both heat and light.
• High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,
• Low moisture vapor transmission rate makes BondTape AF2505 an excellent vapor barrier.
• Service Temperature range from -20° to +80°C (-4° to +176°F).
TYPICAL PHYSICAL PROPERTIES
| PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
| Backing Thickness |
25 Micron |
1.0 Mil |
PSTC-133 / ASTM D 3652 |
| Total Thickness |
60 Micron |
2.4 Mil |
PSTC-133 / ASTM D 3652 |
| Adhesion to Steel |
18 N/25mm |
65 Oz./In. |
PSTC-101 / ASTM D 3330 |
| Tensile Strength |
40 N/25mm |
9.1 Lb/In |
PSTC-131 / ASTM D 3759 |
| Elongation |
3.0 % |
3.0 % |
PSTC-131 / ASTM D 3759 |
| Service Temperature |
-20 ~ +80 °C |
-4 ~ +176 °F |
------------ |
| Applying Temperature |
+10 ~ 40 °C |
+50 ~ +105 °F |
------------ |
TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 1200m / 1350m
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user's method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).
AF3005
PRODUCT DESCRIPTION
A high tensile strength aluminum foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper.
FEATURES
• Aluminum backing provides excellent reflection of both heat and light.
• High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application.
• Low moisture vapor transmission rate makes BondTape AF3005 an excellent vapor barrier.
• Service Temperature range from -20° to +80°C (-4° to +176°F).
TYPICAL PHYSICAL PROPERTIES
| PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
| Backing Thickness |
30 Micron |
1.2 Mil |
PSTC-133 / ASTM D 3652 |
| Total Thickness |
70 Micron |
2.8 Mil |
PSTC-133 / ASTM D 3652 |
| Adhesion to Steel |
25 N/25mm |
90 Oz./In. |
PSTC-101 / ASTM D 3330 |
| Tack Rolling Ball |
20 cm |
8.0 In. |
PSTC-6 / ASTM D 3121 |
| Tensile Strength |
45 N/25mm |
10.2 Lb/In |
PSTC-131 / ASTM D 3759 |
| Elongation |
%. |
3.0 |
PSTC-131 / ASTM D 3759 |
| Service Temperature |
-20 ~ +80 °C |
-4 ~ +176 °F |
------------ |
| Applying Temperature |
+10 ~ 40 °C |
+50 ~ +105 °F |
------------ |
TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 1350m
STORAGE & SHELF LIFE: One year when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user's method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape product between +10 ~ +40°C (+50 ~ +105 °F).
LIMITED WARRANTY & LIMITED REMEDY: Your exclusive remedy & BondTape obligation shall be, at BondTape's option, to replace or repair the BondTape product or refund the purchase price of the BondTape product.
FOB Price: US $ 0.35 - 2 / Square Meter
Min. Order Quantity: 2, 400 Roll/Rolls 2, 400 cut rolls (4 jumbo rolls)
Supply Ability: 3, 000, 000 Square Meter/Square Meters per Month 3, 000, 000sqm/month
Port: Shanghaiport/zhangjiagang port
Payment Terms: L/C, D/A, D/P, T/T, T/T, D/P, L/C at sight
Quick Details
Place of Origin: Jiangsu, China (Mainland)
Brand Name: Bondtape
Model Number: AF2205/ AF2505/ AF3005
Type: Air Conditioning
Color: Color: Silver/Black/White Aluminum Foil Duct Tape
Adhesive: Synthetic rubber-resin adhesive
Packaging & Delivery
Packaging Details: Outer packing: Cut roll: Carton Log roll: Carton + pallet / ply-wooden case Jumbo roll: Ply-wooden case
Delivery Detail: 20 day
Product Description
High tensile strength aluminum foil backing, combined with a high performance synthetic rubber-resin adhesive, producted by an easy-release silicone release paper.
Features:
1) Soft aluminum foil, combined with a transparent high performance rubber-resin adhesive, which provides high peel adhesion and strong holding power
2) Designed for sealing joints and seams of foil jacket facings in air-conditioning ductwork
Specifications:
1) Foil thickness: 18, 22, 25, 30, 36, 40, 45, 50μ M
2) Roll width: 48, 50, 60, 72, 75, 96, 100mm
3) Roll length: 27, 30, 45, 50m
4) Log roll: 1.2 X 45m, 1.2 X 50m
5) Jumbo roll: 1.2 X 1, 200m, 1.2 X 1, 000m
Packaging & Shipping
Inner packing:
Cut roll: Printed core and shrink wrapping
Log roll: Cardboard wrapping
Jumbo roll: Plastic film + corrugated board wrapping
Outer packing:
Cut roll: Carton
Log roll: Carton + pallet / ply-wooden case
Jumbo roll: Ply-wooden case
| PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
Backing Thickness |
25 Micron |
1.0 Mil |
PSTC-133 / ASTM D 3652 |
Total Thickness |
55 Micron |
2.2 Mil |
PSTC-133 / ASTM D 3652 |
Adhesion to Steel |
10 N/25mm |
36 Oz. /In. |
PSTC-101 / ASTM D 3330 |
Tack Rolling Ball |
8.0 cm |
3.2 In. |
PSTC-6 / ASTM D 3121 |
Tensile Strength |
75 N/25mm |
17 Lb/In |
PSTC-131 / ASTM D 3759 |
Elongation |
%. |
100 |
PSTC-131 / ASTM D 3759 |
Service Temperature |
-30 ~ +100 ° C |
-22 ~ +212 ° F |
------------ |
Applying Temperature |
+10 ~ 40 ° C |
+50 ~ +105 ° F |
------------ |
Audited Supplier 
){kind=link}
){kind=link}